Lowell Rack Power Audio

Home Page
in association with
Click to go to Turnstiles US Home Page

GSA No. GS-07F-9239S

INTERNET MERCHANT SINCE 1997
ESTABLISHED MAY 1990
303-670-1099

19" Punched Panels (cutouts for rackmount controls)

racks - panel

Price $ 36.00

Model no. D4P-1

Description: 1U panel with 4 Decora-style cutouts mounts system devices, controls and connectors in minimal rack space. Mounts low voltage devices with a maximum width of 1.75” (horizontal orientation). Includes kep-nut hardware. Black.

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
D4P-1
Decora 4-hole (horiz) panel
yes
steel
black smooth
1
1


racks - panel

Price $ 46.00

Model no. SG6P-3

Description: 3U panel with cutouts and clips. Front load up to 6 single-gang (standard wallplate) devices that install with 2 screws. Panel was engineered to rackmount single-gang devices that have a non-removable front plate. Note: spacing is not suitable for 2-gang devices. Black.

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
SG6P-3
single gang 6-hole panel
yes
steel
black smooth
3
1


racks - panel

Price $ 51.00

Model no. D3P-ID-1

Description: 1U flanged steel panel with 3 Decora-style cutouts mounts low voltage devices with a maximum width of 1.75 inches (horizontal orientation). Includes Pocket-ID label holder at the left of each cutout, and kep-nut hardware. Black. Does not include controls.   Template for label:  POCKETID-E

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
D3P-ID-1
Decora 3-hole (horiz) panel
yes
steel
black smooth
1
1


racks - panel

Price $ 57.00

Model no. D3P-ID-2

Description: 2U flanged steel panel with 3 Decora-style cutouts, accommodates up to 3 wide-body attenuators (AVLELEC model 200LVC or 150LVCS) mounted in horizontal openings. Includes Pocket-ID label holder at the left of each cutout, and kep-nut hardware. Black. Does not include controls. Template for label:  POCKETID-E

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
D3P-ID-2
Decora 3-hole (horizontal)
yes
steel
black smooth
2
1


racks - panel

Price $ 69.00

Model no. D8P-ID-3

Description: 3U flanged steel panel mounts 8 single-gang Decora-style devices. Includes Pocket-ID label holder above cutouts, and kep-nut hardware. Note: order blank filler plates (model no. DBB-4) to fill unused cutout positions. Template for label:  POCKETID-A

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
D8P-ID-3
Decora 8-hole panel
yes
steel
black smooth
3
1


racks - panel

Price $ 69.00

Model no. D9P-ID-3

Description: 3U flanged steel panel mounts 9 single-gang Decora-style devices or 4 multi-gang devices using alternate spaces (i.e. AVLELEC model no. 200LVC or 150LVCS fit in every other space. Clearance for non-AVLELEC controls should be confirmed). Includes Pocket-ID label holder above cutouts, and kep-nut hardware (order blank filler plates to fill unused positions separately). Template for label:  POCKETID-B

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
D9P-ID-3
Decora 9-hole panel
yes
steel
black smooth
3
1


racks - panel filler plate

Price $ 17.00

Model no. DBB-4

Description: Decora-style blank filler plates for unused positions in 19" panels with Decora-style holes.

Model No.
Type
Quantity
DBB-4
blank filler plates
4


racks - panel

Price $ 49.00

Model no. IP-ID-1

Description: Identification panel with Pocket-ID – IU flanged steel panel with label area to identify equipment installed above and below panel position.Template for label:  POCKETID-D

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
IP-ID-1
identification strip panel
yes
steel
black smooth
1
1


N10PID1 rack panel with cutouts for volume control

Price $ 56.00

Model no. N10P-ID-1

Description: 1U flanged steel panel mounts up to 10 Neutrik D-series connectors or Switchcraft E-series (not included). Black and nickel-plated screws (24 ea.) included for connector installation. Note: blank filler plates for this panel can be ordered directly from Neutrik (#DBA). Template for label:  POCKETID-C

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
N10P-ID-1
Neutrik 10-hole panel
yes
steel
black smooth
1
1


racks - panel

Price $ 48.00

 

Model no. LVC8P-ID-2

Description: 2U flanged steel panel mounts up to 8 AVLELEC LVC-RM-series volume controls (sold separately). Includes filler plugs for unused positions. Device hardware not included with panel. Template for label:  POCKETID-A
Note: this panel can also be ordered pre-loaded with up to 8 volume controls. See spec sheet for details.

Model No.
Type
Flange
Metal
Finish
Rack Units
Quantity
LVC8P-ID-2
8-hole volume control panel
yes
steel
black smooth
2
1
 
How does an 
AVLELEC
 Soundmasking

System Work?


SAMPLE
WHITE NOISE
RECORDINGS


White Noise - White Paper

Pwd = Soundmasking

www.AVLELEC.com
8641 South Warhawk Road, Conifer Colorado 80433
Tel: 303-670-1099 * FAX: 303-679-8949
email: Patrick.McAllister@avlelec.com

Typical
Soundmasking
Sytem-Kit
You Install with our Support
Take a look at the type of Documentation
we provide

Click Here

Children's Hospital
Self-Install Kit