Lowell Rack Power Audio

Home Page
in association with
Click to go to Turnstiles US Home Page

GSA No. GS-07F-9239S

INTERNET MERCHANT SINCE 1997
ESTABLISHED MAY 1990
303-670-1099

Desk & Credenza Racks

AV rack

from $ 369.00


LCR: credenza rack

Rugged welded rack for credenzas or cabinets, or stand-alone use. 16-gauge steel with 11-gauge corner post rails. Ships ready to install.

Made in USA.

 

Click each Model for Data Sheet

Model No. RU* Overall Depth Overall Height Overall Width
LCR-816 8 16.00" / 406.40mm 14.94" / 379.48mm 19.25" / 488.95mm
LCR-1016 10 16.00" / 406.40mm 18.44" / 468.38mm 19.25" / 488.95mm
LCR-1216 12 16.00" / 406.40mm 21.94" / 557.28mm 19.25" / 488.95mm
LCR-1416 14 16.00" / 406.40mm 25.44" / 646.18mm 19.25" / 488.95mm
LCR-818 8 18.00" / 457.20mm 14.94" / 379.48mm  19.25" / 488.95mm
LCR-1018 10 18.00" / 457.20mm  18.44" / 468.38mm 19.25" / 488.95mm
LCR-1218  12 18.00" / 457.20mm 21.94" / 557.28mm  19.25" / 488.95mm
LCR-1418  14 18.00" / 457.20mm 25.44" / 646.18mm  19.25" / 488.95mm

 

equipment rack

from $ 317.00

 

LDTR: Desktop Rack

The LDTR Series is an economical desk rack designed to house electronics kept near-at-hand such as by, on or under a desk or counter. Fully welded 16-gauge steel top, bottom, and sides. Top and base have knockouts for wiring. Sides feature top and bottom vents. Open front has beveled corners and a frame that's prepped to mount an optional front door with left or right hand swing. Open back will accept optional rear access cover. Includes fixed-position front and rear mounting rails, tapped 10-32 and rubber feet to protect desk surfaces. Black wrinkle powder epoxy finish. Made in the USA with certified U.S. steel. 7-16 rack units.

Compliance: EIA, TIA, RoHS

Click each Model for Data Sheet

Model
No.
RU* Overall 
Depth
in. [mm]
Useable 
Depth
in. [mm]
Rack 
Height
in. [mm]
Overall Height
(with feet)
in. [mm]
Overall 
Width
in. [mm]
LDTR-718 7 18.18  [462] 17.20  [437] 16.63  [422] 17.13  [435] 23.06  [586]
LDTR-1018 10 18.18  [462] 17.20  [437] 21.88  [556] 22.38  [568] 23.06  [586]
LDTR-1218 12 18.18  [462] 17.20  [437] 25.38  [645] 25.88  [657] 23.06  [586]
LDTR-1418 14 18.18  [462] 17.20  [437] 28.88  [734] 29.38  [746] 23.06  [586]
LDTR-1618 16 18.18  [462] 17.20  [437] 32.38  [822] 32.88  [835] 23.06  [586]

 


 

studio rack

from $ 400.00

 

LDSR: desktop rack (sloped front)

EIA compliant desktop rack with welded sides, open bottom, bolted mounting rails and 12-degree front slope provides easier viewing of mounted equipment from a seated position.

Model Series: LDSR

Features:

• Fixed-position front smounting rails tapped 10-32
• Protective rubber feet
• 16-ga. steel
• Open front/back/bottom for cable management
• Black wrinkle finish
• Optional rear rails, protective runner kit, rear access cover. Note: this rack will not accept a front door so protruding knobs are not a problem.
• Rack width: 21.1"
• Rack units: 7, 10, 12
• Overall depth at base: 18"
• Made in USA with 100% US steel

Click each Model for Data Sheet

Model No.
RU
OA Depth (in)
OA Height (in)*
OA Width (in)
LDSR-718
7
18
14.21
21.1
LDSR-1018
10
18
19.35
21.1
LDSR-1218
12
18
22.77
21.1


*Overall height shown does not include protective rubber feet (add .5")


 

from $ 1,035.00

LPSR: Studio Rack

The LPSR studio rack has hidden casters for convenient roll-out access to audio-visual electronics kept under a desk or counter. The ergonomic design with 15 degree slope allows an easy view of equipment while seated at a desk. Cutouts for Decora® style accessories allow access to specific controls without opening the rack. Includes front and rear fixed-position mounting rails, tapped 10-32, with printed RU scale to facilitate gear-mounting. Two rear cable entry ports. Optional laminate top. Black wrinkle powder epoxy finish. 12 rack units. 

  • Welded steel top (optional laminate top)
  • Stowaway front door with keyed lock opens from top, slides into base
  • Rear access cover is keyed differently than front door. Removable to access equipment.
  • Welded sides have top and bottom vents, and integral handles.
  • Fixed-position front mounting rails, tapped 10-32, remain in the factory-mounted position. Printed RU scale facilitates gear-mounting.
  • Load capacity 250 lbs.
  • EIA, TIA, RoHS compliant
  • Made in the USA with certified U.S. steel

Click each Model for Data Sheet

Model
No.
Top RU* Overall Depth
in. [mm]
Overall Height
in. [mm]
Overall Width
in. [mm]
LPSR-1226 welded metal 12 angled 25.52  [648] 26.88  [683] 23.00  [584]
LPSR-1226GT welded metal plus 
Graphite Grey laminate 
with rubber edge molding
12 angled 26.52  [674] 27.88  [708] 23.75  [603]

 


 

from $ 80.00

LRS: Rack

LRS Series desktop racks have a small footprint with just enough rack space to hold smaller AV/IT equipment arrangements where space is limited and a full sized rack is not required. The racking space is on a 10 degree slope for easy viewing from a seated position. Rails are tapped 10-32 and feature a printed RU scale to facilitate set-up. Smooth black powder epoxy finish. Ships unassembled. 8 and 12 rack units. 

  • Compact design for installation on a desk 
  • Two post stand is engineered to meet EIA standards
  • Rails are tapped 10-32 and feature a printed RU scale to facilitate set-up
  • 10 degree sloped front
  • Made in the USA with certified U.S. steel.

Click each Model for Data Sheet

Model
No.

Load Capacity
lbs. [kg.]

RU* Overall Depth
in. [mm]
Overall Height
in. [mm]
Overall Width
in. [mm]
LRS-8 80  [36] 8 11.5  [292] 15.86  [403] 19.06  [484]
LRS-12 80  [36] 12 11.5  [292] 22.86  [581] 19.06  [484]
 
How does an 
AVLELEC
 Soundmasking

System Work?


SAMPLE
WHITE NOISE
RECORDINGS


White Noise - White Paper

Pwd = Soundmasking

www.AVLELEC.com
8641 South Warhawk Road, Conifer Colorado 80433
Tel: 303-670-1099 * FAX: 303-679-8949
email: Patrick.McAllister@avlelec.com

Typical
Soundmasking
Sytem-Kit
You Install with our Support
Take a look at the type of Documentation
we provide

Click Here

Children's Hospital
Self-Install Kit